Product Information: Support

Email Your Question To: SHAKER SUPPORT

We Will Do Our Best To Respond To You Within 48hours.

To Help Ensure Good Performance From The SHAKER™, Please Read The Following Recommendations:

i) Remember That The SHAKER™ Wiper De-icer, Is Just That, i.e., It Is NOT A Windshield De-icer, So Use Your Ice Scraper For That Purpose, but be careful not to damage the SHAKER™ wire harness.;

ii) The SHAKER™ Will Help Maintain Good Wiper Blade Performance while driving (assuming the wiper blade is in good condition to start with). So Before You Start Your Journey, Please Ensure Your Wiper Blades & Windshield Have Been Cleared of frozen debris.;

iii) Replace Your Wiper Blades Every 6 Months As Recommended By Wiper Manufactures. During Each 6 Month Period, You Can Help Maintain Good Wiper Performance, By Cleaning The Wiper Blade Edge With A Soft Cloth Soaked With Windshield Washer Fluid.;

iv) Each Time You Replace Your Wiper Blades, Also Clean Your Windshield With A Non-abrasive Cleaner, e.g., "Bon-Ami".;

v) Always Ensure That Your SHAKER™ Is Properly Fixed To The Wiper Arm Of Your Vehicle - Consult Our Installation Page Or Your Technical Manual For Proper Mounting.

vi) If You Are Going To Use The SHAKER™   To Solve "Conformance" and "A-pillar" Build-up Problems, You Must Use The SHAKER™ At The First Signs Of Any Problems, Otherwise, The Build-up Could Become Unmanageable.;

vii) If You Have Your Vehicle Washed, Turn On Both Your Wipers And The SHAKER™ For Approximately 5 Seconds Before Completely Exiting the Car Wash - This Should Effectively "Shake" Any Excess Water From The Blades. Doing This Will Help Prevent The Cold Air From Freezing Up Your Wiper Blade , i.e. "Conformance" Problems.