Product Information: Installation
Video
CLICK
HERE To See Why A Proper Strain Relief for the SHAKER™
Is So Important!!!
CLICK
HERE To See A Proper Strain Relief
In Action!!!
CLICK
HERE for SHAKER™ INSTALLATION
Video ~ 3minutes
(In
Order To Not VOID Warranty, Please Ensure Proper Wire
Harness Slack, AKA "Strain Relief" At Wiper Arm Hinge
Area, As Directed In This Video).
A qualified mechanic should
be easily able to follow the installation instructions.
NOTE: In Most Cases,
You Will Not Require Any Adjustment To Your Wiper Arm To Properly
Mount A SHAKER™.
As per our Compatibility
chart, In a very Small Percentage of Vehicles, It May Be Necessary
To Make A Minor "Spline" Adjustment Of The Wiper Arm,
Which Means Loosening The Wiper Arm Mounting Nut and Then Shifting
The Wiper Arm On The Mounting Spline By One Position - We highly
recommend a qualified Mechanic do this when they are doing the installation
of the SHAKER™
itself.
CLICK
HERE here for SHAKER™
PHOTO'S PAGE
For each video clip, you
will be prompted to download a video file. Once downloaded, you
can view either video with "Windows
Media Player" or similar product. The videos will take
10 - 15 minutes using a 56Kb modem, thus a high-speed connection
is recommended for these files. Depending on how your PC is configured,
the video file may run automatically, or may need to be "clicked
on" once executed from your Windows download directory.
• Download Windows
Media Player
Shaker™
Clearance Check |
 |
 |
Distance from wiper arm at blade pivot,
to hood edge must be AT LEAST 2" |
Distance from top of wiper arm at blade
pivot, to windshield must be AT LEAST 11/4" |
For General Installation, Please Ensure Your Wiper Arms/Blades Are:
- In Good Condition;
- Using The Proper Wiper Blade Adapter Piece That Comes With Your Wiper Blade Each Time You Replace Your Wiper Blade Every Six Months (e.g., So That The Blade Snuggly Fits With Little Lateral Wobble);
- Also, As per our Compatibility
chart, If Your Vehicle Has A Spoiler Mounted To The Wiper Arm/Blade,
It Must Be Removed To Allow For Proper Flush Mounting Of The SHAKER™ Clamp Head. Contact Wiper Shaker Technology Regarding
Availability Of An Appropriate Spoiler Adapter If Required, i.e.,
In Cases Where The Spoiler May Be Riveted And Thus Cannot Be Removed.
As per our Compatibility
chart, the SHAKER™
is typically not compatible with vehicles older than 1992. Prior
to 1992, although there might have been a small percentage of vehicles
that utilized a "hook" wiper arm, they also tended to
recess the wiper arm portion down inside of the wiper blade housing,
thus not leaving three (3) edges of the wiper arm (i.e., the 2 sides
and the top of the wiper arm) open to the SHAKER™
clamp. Note : As of the 2006-2007 Season, Our Main
Focus Has Been With The Heavy Trucking Industry, Thus This Database
for Passenger Vehicles Has Not Been Updated Except for
Ford Models
While the installation
of the SHAKER™
is relatively simple, it does require the passing of a wire harness
through the firewall, thus we strongly recommend individuals have
a qualified mechanic do the installation.
|
