NOTE : This Chart Is Only Meant To Be A Guide , So , YOU MUST VERIFY DIMENSIONS FOR YOUR TRUCK. You May Also Want to Check The Installation Section For Proper Clearance.
The SHAKER™ Is Compatible With The Majority of Heavy Truck Wiper Arm/Blades Configurations. Specifically, The Most Common Are Of The "9mm x 3mm" and "9mm x 4mm" HOOK Wiper Arm Variety (these are similar to what is found on most Cars and SUV's etc.). Should Your Truck Have "Tubular" (round) or "12mm" Wiper Arms (as found on some Mack Trucks), We Have Adapters Available For Both. Please Consult Us If Your Truck Has "Pin & Side" Wiper Arms.
NOTE: The SHAKER™ Is Not Currently Compatible With Dual Tubular Wiper Arms, As Would Be Found On A Large Touring Bus (as they exceed the recommended operational length; See FAQ #20) or Wiper Arms That Also Have An Idler Arm Attachment (as the SHAKER™ would come in contact with the moving attachment).
CLICK HERE To See Various DOT Installations